------------------------------------------------------------------------------
Wake on LAN for Windows Ver.1.0.1.0

PC launcher support Wake on LAN 
(get MAC address, IP address with acquisition function)

                            Copyright(C) 2013 gusuku.org All Rights Reserved
------------------------------------------------------------------------------
                                                      Last updatedF2013/01/26

[Overview]

This software was created to launch the target host by sending a magic packet 
to a host of support Wake on LAN.

The display lists the host, we are able to check the activation status.

In addition to sending a magic packet, have the ability to get the MAC address
from the host name or IP address.

[Operating Environment]

Windows XP, Windows Vista, Windows 7
(I think maybe, and also work WindowsVista)

[Configuration file]

The following files are generated when you extract the archive.

    WinWol.exe             Program file
    Readme_WinWol.txt      Document file written in Japanese.
    Readme_WinWol-en.txt   This file

Note:
This file was converted to English using google translation the Readme-WinWol.txt written in Japanese.

[Installation]

Please put in the appropriate folder WinWol.exe.
You do not need special installation.

[Uninstall]

I just remove the (WinWol.exe) files placed.

[How to use]

We start by, for example, double-click the WinWol.exe.

[Explanation of screen]

  [File] menu

     [End of the program]
       I exit the program.

  [Edit] menu

     [Add]
       I want to add the host information.
       Display the setting dialog editing, we add the host information at the
       end of the list.

     [Insert]
       I insert the host information.
       Display the setting dialog editing, we add the host information to the
       selected row in the list.

     [Edit]
       I will edit the host information.
       Display the setting dialog editing, we edit the host information of the
       selected row in the list.

     [Delete]
       I remove the host information.
       Display the setting dialog editing, we remove the host information of 
       the selected row in the list.

  [View] menu

     [Refresh]
       We will update the display startup status of the host in the list.
       We will determine the response to send ICMP packet to all hosts in the
       list.
       You can set the option to wait for the response of the ICMP packet, 
       which will be described later.

     [Active Check]
       Activation status of the host to update the display of the selected row
       in the list.
       We will make sure to send ICMP response packet to the selected host in
       the list.
       You can set the option to wait for the response of the ICMP packet, 
       which will be described later.

     [Auto Refresh Start]
       I refresh process is repeated periodically.
       You can set the update interval in the options described below.

     [Auto Refresh Stop]
       I will stop processing the periodic refresh.

  [Tool] menu

     [Send]
       I will try to start by sending a magic packet to the selected host.

     [Get IP Address]
       I want to display a dialog to obtain an IP address.
       Get IP address in the dialog, we retrieve and display the IP address 
       based on the host name entered.

     [Get MAC Address]
       I get MAC address displays a dialog.
       Get MAC address in the dialog, we retrieve and display MAC address 
       based on the IP address or host name you enter.

     [Get Host Name]
       I get the host name to display the dialog.
       Gets the host name in the dialog, we are to retrieve and display the
       host name based on the IP address that you entered.

  [Option]
       I want to display the Option dialog box.
       Option dialog box, set the following items.
         1. Response timeout ICMP
           Specifies the time, in milliseconds, the response timeout ICMP.
           To confirm the response by sending ICMP packets to check the 
           activation status, I will not come if a response is no response and
           wait for the time specified here.
           In order to send the ICMP to all hosts in the list, the display
           update time during start-up and will take much time to update start
           and wait for the response is long.

         2.Max number of regist host
           We will specify the maximum number of hosts that can be registered
           in the list.
           I have done and update the configuration file based on this number.

         3.Auto refresh interval
           We will specify the number of seconds between automatic updates used
           to start automatic updates.

         4.Destination port number
           I want to specify the port number to send the magic packet.
           Port number does not have any significance, I usually specify 0.

         5.At the start check the active status of the host in list.
           Selected at the start of the program, send an ICMP to all hosts in
           the list, whether or not to check the activation status.
           Program start-up is faster and that if you have a large number of 
           hosts in the list should be set to OFF to check.

  [Edit Host] Dialog
       In the Edit Host dialog, I set the following items.
         1. Host Name
           I want to specify the host name that is registered in the list.

         2. Comment
           I specify a comment for the host.

         3.IP address
           I specify the IP address of the host.
           Displays a dialog to obtain an IP address in the Acquire button, you
           can get the IP address from the host name that you entered.

         4. Netmask
           I specify the netmask.
           If you enter an IP address, we seek to set the netmask from the 
           address class.

         5.MAC Address
           I specify the MAC address of the host.
           Displays the MAC address in the acquisition dialog Acquire button, 
           you can get the MAC address from the host name or IP address you 
           entered.

[Update History]

Ver.1.0.1.0 2013/01/26  Initial release

[Terms of Use]

Terms of Use
     There are no special conditions. Please use freely.
     However, unless we are to be used for that crime or harm to others.

For distribution
     Redistribution in the state that has not been edited or modifications 
     (source code) is free.

     (If the source code) for editing and modification
     Changes or modifications can be carried out freely, but, if you want to 
     redistribute those changes, you need to include in the distribution 
     document that clearly states the changes.

     If you want to use other software part of the source code for this 
     software is that it does not apply.

And Disclaimer
     I have been caused by the use of this software, and what the author is not
     responsible for any failure, for whatever damages.

     The authors assumed that even in the case of this software bug is found,
     correct them and not assume the obligation of version up

For requests Bug
     For bugs and requests, please email.
     However, this does not necessarily mean a guaranteed bug fixes, is 
     reflected in the demand.

Information Copyright:
     The copyright of this software is owned by the author is gusuku.org there.
     This software is protected by international copyright laws and treaties.
     The grant to be used within the scope of the Acceptable Use Policy, use in
     violation of the Acceptable Use Policy, and make and distribute, please 
     note it will be copyright infringement.

[Contact]
     gusuku.org
     root@gusuku.org
